Natural Finish Varnish

Liberon Natural Finish Varnish is a tough, durable, non-yellowing, water based varnish that is especially suited for use on softwood such as pine. Keeping the natural feel and look of the timber Natural Finish Varnish uses a non-yellowing and quick drying formula that is water, heat and alcohol resistant. - Maintains the natural feel and look of the timber 
- Water based, low VOC 
- Highly resistant to scratches and stains 
- Non- yellowing and quick drying 
- Ideal for soft and hard woods 
- EN71 Part 3 Approved – Safe for toys 
- Usage : Interior      Preparation
Ensure the surface is sanded, clean, dry and free from dust or previous finishes. If you want to colour the wood you can apply Liberon Spirit Wood Dye or Liberon Palette Wood Dye to the timber before varnishing. Alternatively Liberon Palette Wood Dye may be added to the varnish to create unique colour tones. Add one 250 ml Liberon Wood Floor Dye to one 2.5 L tin of Natural Finish Varnish. Liberon Dyes are available in a range of wood shades. 

Application
Apply the first coat of varnish using a Flat Lacquer Brush or an acrylic paint brush, brushing with the grain wherever possible. Allow to dry for a minimum of 30 minutes and sand lightly if required. Apply a second and third coat of varnish as above and allow to dry for a minimum of 8 hours before using the varnished surface. If being used as a sealer for Liberon Black Bison Wax Polish, apply one coat of varnish, allow to dry, then lightly sand and wipe off any dust before applying the wax. 

Important
Always test product on a spare surface or inconspicuous area to check colour, compatibility and end result.     

1 L = 8-12 m²

Clear Satin, Clear Matt 250 ml, 750 ml, 2.5 L Min 30 minutes

Tool cleaning:Water

Application: Brush