Wood Filler

Liberon Wood Filler is a water based, multi-purpose filler used to fill and repair surface damage in wood. Quick drying, shrink and crack resistant, flexible and stainable, it is easily sanded and may be screwed and nailed. The low odour, easy to use Wood Filler is suitable for both interior and exterior use. Wood filler may be stained, varnished, waxed or painted. When using outdoors protect with a suitable exterior grade finish. Wood Filler is available in natural and a selection of wood shades, it may also be coloured with Liberon Earth Pigments. - Water based 
- Easy to use 
- Drying time 1 hour minimum 
- Low odour 
- Flexible and stainable 
- Minimal shrinkage 
- Suitable for interior and exterior use
- Wide range of colours available
- Usage : Interior and exterior      Preparation 
Ensure the area to be repaired is clean, dry and free from dust. Select the colour which is closest to the colour of the wood, adapting your choice if dying the wood. 

Application 
Apply using a Liberon plastic scraper or suitable filling knife. For best results resist overspreading the repair area, but leave sufficient over fill to enable thorough sanding. Allow to dry thoroughly – two hours or more depending on the depth of the repair. Then sand, colour and finish as required. 
Small holes may be filled in one operation. Deeper holes should be built up in layers. 

Important
Always test product on a spare surface or inconspicuous area for colour, compatibility and end results. Wood Filler may accept dyes/stains differently to surrounding wood.      As required

Natural, Antique Pine, Dark Oak, Mahogany. 25 ml BP, 125 ml Min 2hrs Depending on depth

Tool cleaning:Water

Application: Painter's knife